ZNDS智能電視網 推薦當貝市場

TV應用下載 / 資源分享區

軟件下載 | 游戲 | 討論 | 電視計算器

綜合交流 / 評測 / 活動區

交流區 | 測硬件 | 網站活動 | Z幣中心

新手入門 / 進階 / 社區互助

新手 | 你問我答 | 免費刷機救磚 | ROM固件

查看: 103823|回復: 17
上一主題 下一主題
[求助]

華為悅盒EC6108V9C 救磚,大神進來看下

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2018-1-7 15:47 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式 | 來自浙江
我的悅盒盒子標注的型號:EC6108V9C
關于設備的型號:EC6108V9_pub_lnldx
拆機主板的型號:EC6108V9B開機卡啟動畫面,進不了REC 下了有個救磚包能進到安卓小人進度走完不重啟,短接J16無反應TTL跑碼如下,這個怎么解決,還有得救嗎?

-- Install /sdcard/update.zip ...
E:Can't find misc
Finding update package...
I:Update location: /sdcard/update.zip
Opening update package...
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
I:read key e=65537 hash=20
I:1 key(s) loaded from /res/keys
Verifying update package...
E:footer is wrong
I:verify_file returned 0
Installing update...
E:use script method is  BUTTON_UPDATE
user normal script_name="META-INF/com/google/android/updater-scrinit: untracked pid 478 exited
ipt"
start......package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/bootargs for write: No such file or directory
package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/fastboot for write: No such file or directory
script result was [update ok ...]

update bootargs......
update fastboot......
update ok ...
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
W:Can't unlink /cache/recovery/command
Rebooting...
Restarting system with command ''.
CPU will restart.
Bootrom start
Boot from eMMC
Starting fastboot ...


System startup
DDRS
Reg Version:  v1.1.0
Reg Time:     2016/2/25  9:23:54
Reg Name:     hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Jump to DDR


Fastboot 3.3.0-00692-g8276f4e-dirty (root@HW-TV-S3) (Jun 30 2016 - 02:07:27)

Fastboot:      Version 3.3.0
Build Date:    Jun 30 2016, 02:08:32
CPU:           Hi3798Mv100
Boot Media:    eMMC
DDR Size:      1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
MMC/SD Card:
    MID:         0x11
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7456M Bytes (High Capacity)
    Name:        "008G3"
    Chip Type:   MMC
    Version:     4.0
    Speed:       52000000Hz
    Bus Width:   8bit
    Boot Addr:   0 Bytes

*** Warning - bad CRC or eMMC, using default environment


Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked


SDK Version: HiSTBAndroidV600R001C00SPC063_v2016022921

get key value  0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 10485760
HI_Flash_Read Ret= 10485760
******** boot from kernel...********
bootargs = coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),340M(backup),340M(cache),520M(system),-(userdata)HI_Flash_Read Ret= 512
HI_Flash_Read Ret= 512
Stb mac is : [50:01:6B:34:4F:D6]

Reserve Memory
    Start Addr:          0x3FFFE000
    Bound Addr:          0x8D3D000
    Free  Addr:          0x3ED48000
    Alloc Block:  Addr        Size
                  0x3FBFD000       4194304
                  0x3F8FC000       3145728
                  0x3F87B000       524288
                  0x3F878000       8192
                  0x3F843000       212992
                  0x3F742000       1048576
                  0x3F73E000       12288
                  0x3F3B9000       3686400
                  0x3F223000       1658880
                  0x3EE9E000       3686400
                  0x3ED4B000       1384448
                  0x3ED48000       8192

Press Ctrl+C to stop autoboot

kernel  @ 3e08000 (7834960 bytes)
ramdisk @ 4e00000 (329254 bytes)
page size @ 2048 bytes
initrd rd_start = 4e00000,rd_end = 4e50626
## Booting kernel from Legacy Image at 01ffc7c0 ...
   Image Name:   Linux-3.10.0_s40
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7834896 Bytes = 7.5 MiB
   Load Address: 02000000
   Entry Point:  02000000
load:2000000,blob_start:1ffc7c0,blob_end:2775510,image_start:1ffc800,image_len:778d10
   Loading Kernel Image ... OK
OK
   kernel loaded at 0x02000000, end = 0x02778d10
images.os.start = 0x1FFC7C0, images.os.end = 0x2775510
images.os.load = 0x2000000, load_end = 0x2778d10
ret -2
initrd rd_start = 4e00000,rd_end = 4e50626

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.0_s40 (liuwenlong@HW-TV-S1) (gcc version 4.4.1 (Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl)) ) #1 SMP Mon May 23 10:49:56 CST 2016
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: bigfish
cma: CMA: reserved 380 MiB at 27000000
cma: CMA: reserved 4 MiB at 3fc00000
Memory policy: ECC disabled, Data cache writealloc
CPU: Hi3798Mv100
PERCPU: Embedded 8 pages/cpu @81a84000 s12224 r8192 d12352 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),340M(backup),340M(cache),520M(system),-(userdata) mem=1G mmz=ddr,0,0,380M
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024MB = 1024MB total
Memory: 620436k/620436k available, 428140k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x80eddfa0   (15192 kB)
      .init : 0x80ede000 - 0x80f4efc0   ( 452 kB)
      .data : 0x80f50000 - 0x810970c8   (1309 kB)
       .bss : 0x810970c8 - 0x8127d49c   (1945 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:192
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
Calibrating delay loop... 1949.69 BogoMIPS (lpj=974848)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
ftrace: allocating 33110 entries in 98 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80b27ea8 - 0x80b27f00
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (7829.50 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
[111 ERROR-Invalid]:MCE_Init[2135]:ERR: get PDM Param
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0xf8b00000 (irq = 81) is a PL011 rev2
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0xf8006000 (irq = 82) is a PL011 rev2
uart:2: ttyAMA2 at MMIO 0xf8b02000 (irq = 83) is a PL011 rev2
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource timer3
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 320K (84e00000 - 84e50000)
NetWinder Floating Point Emulator V0.97 (double precision)
CPU PMU: probing PMU on CPU 0
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
msgmni has been set to 1980
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
input: Hi keyboard as /devices/virtual/input/input0
input: Hi mouse as /devices/virtual/input/input1
input: qwerty as /devices/virtual/input/input2
Hi Android vinput driver init successful!
Found Nand Flash Controller V610.
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
libphy: himii: probed
Up port phy at 0x01 is connect
libphy: PHY himii:1f not found
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbotg: usb otg driver registeredusbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
dwc_otg: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params

WARN::dwc_otg_core_reset:5176: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001

WARN::dwc_otg_core_reset:5176: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001

Using Buffer DMA mode


Bootrom start
Boot from eMMC
Starting fastboot ...


System startup
DDRS
Reg Version:  v1.1.0
Reg Time:     2016/2/25  9:23:54
Reg Name:     hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Jump to DDR


Fastboot 3.3.0-00692-g8276f4e-dirty (root@HW-TV-S3) (Jun 30 2016 - 02:07:27)

Fastboot:      Version 3.3.0
Build Date:    Jun 30 2016, 02:08:32
CPU:           Hi3798Mv100
Boot Media:    eMMC
DDR Size:      1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
MMC/SD Card:
    MID:         0x11
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7456M Bytes (High Capacity)
    Name:        "008G3"
    Chip Type:   MMC
    Version:     4.0
    Speed:       52000000Hz
    Bus Width:   8bit
    Boot Addr:   0 Bytes

*** Warning - bad CRC or eMMC, using default environment


Boot Env on eMMC
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked


SDK Version: HiSTBAndroidV600R001C00SPC063_v2016022921

get key value  0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 10485760
HI_Flash_Read Ret= 10485760
******** boot from kernel...********
bootargs = coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),340M(backup),340M(cache),520M(system),-(userdata)HI_Flash_Read Ret= 512
HI_Flash_Read Ret= 512
Stb mac is : [50:01:6B:34:4F:D6]

Reserve Memory
    Start Addr:          0x3FFFE000
    Bound Addr:          0x8D3D000
    Free  Addr:          0x3ED48000
    Alloc Block:  Addr        Size
                  0x3FBFD000       4194304
                  0x3F8FC000       3145728
                  0x3F87B000       524288
                  0x3F878000       8192
                  0x3F843000       212992
                  0x3F742000       1048576
                  0x3F73E000       12288
                  0x3F3B9000       3686400
                  0x3F223000       1658880
                  0x3EE9E000       3686400
                  0x3ED4B000       1384448
                  0x3ED48000       8192

Press Ctrl+C to stop autoboot

kernel  @ 3e08000 (7834960 bytes)
ramdisk @ 4e00000 (329254 bytes)
page size @ 2048 bytes
initrd rd_start = 4e00000,rd_end = 4e50626
## Booting kernel from Legacy Image at 01ffc7c0 ...
   Image Name:   Linux-3.10.0_s40
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7834896 Bytes = 7.5 MiB
   Load Address: 02000000
   Entry Point:  02000000
load:2000000,blob_start:1ffc7c0,blob_end:2775510,image_start:1ffc800,image_len:778d10
   Loading Kernel Image ... OK
OK
   kernel loaded at 0x02000000, end = 0x02778d10
images.os.start = 0x1FFC7C0, images.os.end = 0x2775510
images.os.load = 0x2000000, load_end = 0x2778d10
ret -2
initrd rd_start = 4e00000,rd_end = 4e50626

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.0_s40 (liuwenlong@HW-TV-S1) (gcc version 4.4.1 (Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl)) ) #1 SMP Mon May 23 10:49:56 CST 2016
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: bigfish
cma: CMA: reserved 380 MiB at 27000000
cma: CMA: reserved 4 MiB at 3fc00000
Memory policy: ECC disabled, Data cache writealloc
CPU: Hi3798Mv100
PERCPU: Embedded 8 pages/cpu @81a84000 s12224 r8192 d12352 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),340M(backup),340M(cache),520M(system),-(userdata) mem=1G mmz=ddr,0,0,380M
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024MB = 1024MB total
Memory: 620436k/620436k available, 428140k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x80eddfa0   (15192 kB)
      .init : 0x80ede000 - 0x80f4efc0   ( 452 kB)
      .data : 0x80f50000 - 0x810970c8   (1309 kB)
       .bss : 0x810970c8 - 0x8127d49c   (1945 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:192
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
Calibrating delay loop... 1949.69 BogoMIPS (lpj=974848)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
ftrace: allocating 33110 entries in 98 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80b27ea8 - 0x80b27f00
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated (7829.50 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
[111 ERROR-Invalid]:MCE_Init[2135]:ERR: get PDM Param
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0xf8b00000 (irq = 81) is a PL011 rev2
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0xf8006000 (irq = 82) is a PL011 rev2
uart:2: ttyAMA2 at MMIO 0xf8b02000 (irq = 83) is a PL011 rev2
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource timer3
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 320K (84e00000 - 84e50000)
NetWinder Floating Point Emulator V0.97 (double precision)
CPU PMU: probing PMU on CPU 2
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
msgmni has been set to 1980
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
loop: module loaded
input: Hi keyboard as /devices/virtual/input/input0
input: Hi mouse as /devices/virtual/input/input1
input: qwerty as /devices/virtual/input/input2
Hi Android vinput driver init successful!
Found Nand Flash Controller V610.
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
libphy: himii: probed
Up port phy at 0x01 is connect
libphy: PHY himii:1f not found
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbotg: usb otg driver registeredusbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
dwc_otg: version 3.00a 10-AUG-2012
Core Release: 3.10a
Setting default values for core params

WARN::dwc_otg_core_reset:5176: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001

WARN::dwc_otg_core_reset:5176: dwc_otg_core_reset() HANG! Soft Reset GRSTCTL=80000001

Using Buffer DMA mode




上一篇:求助EC6108V9C
下一篇:請問,為什么我的華為悅盒電信版連上wifi之后,只能看回放
沙發
 樓主| 發表于 2018-1-7 15:50 | 只看該作者 | 來自浙江
1+8G版的  跑碼按回車沒反應
回復 支持 反對

使用道具 舉報

板凳
發表于 2018-1-7 16:02 | 只看該作者 | 來自浙江
沒看懂
回復 支持 反對

使用道具 舉報

地板
發表于 2018-1-7 18:39 來自ZNDS手機版 | 只看該作者 | 來自浙江
沒看懂+1
回復 支持 反對

使用道具 舉報

5#
發表于 2018-1-13 20:08 | 只看該作者 | 來自河南
跑碼一切正常啊  直接燒 2973169786
回復 支持 反對

使用道具 舉報

6#
發表于 2018-1-24 11:40 | 只看該作者 | 來自河北
樓主解決了嗎,我這個也這樣,有辦法了嗎。
回復 支持 反對

使用道具 舉報

7#
發表于 2018-1-24 11:40 | 只看該作者 | 來自河北

樓主解決了嗎,我這個也這樣,有辦法了嗎。
回復 支持 反對

使用道具 舉報

8#
 樓主| 發表于 2018-1-26 13:47 | 只看該作者 | 來自浙江
沒有解決,卡死啟動界面,安桌小人進度走完不重啟
回復 支持 反對

使用道具 舉報

9#
發表于 2018-1-30 13:01 | 只看該作者 | 未知
等待高手
回復 支持 反對

使用道具 舉報

10#
 樓主| 發表于 2018-2-13 22:05 | 只看該作者 | 來自浙江
今天又拿下了搞了半天,還是一樣刷了好幾個固件都不行,跑碼后面是這樣
-- Install /sdcard/update.zip ...
E:Can't find misc
Finding update package...
I:Update location: /sdcard/update.zip
Opening update package...
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
I:read key e=65537 hash=20
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1735 bytes; signature 1720 bytes from end
I:failed to verify against key 0
E:failed to verify whole-file signature
I:verify_file returned 0
Installing update...
E:use script method is  BUTTON_UPDATE
expected number of arguments (5)
use botton script =META-INF/com/google/android/updater-script-produce-emmc
Warning: No file_contextspackage_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/bootargs for write: No such file or directory
package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/fastboot for write: No such file or directory
package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/recovery for write: No such file or directory
package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/logobak for write: No such file or directory
package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/logo for write: No such file or directory
package_extract_file: can't open /dev/block/platform/hi_mci.1/by-name/kernel for write: No such file or directory
package_extract_file: no pqparam.img in package
There is no /dev/block/platform/hi_mci.1/by-name/qbflag: No such file or directoryerror: make_ext4fs: open: No such file or directory
longjmp botch.
start......
update bootargs......
update fastboot......
update recovery......
update logo......
update logo......
update boot.....
update pqparam.....
update system......

————————————————————
百度翻譯了下

-安裝/ SD卡/ update.zip…

E:找不到其他

查找更新包…

我:位置更新:/ SD卡/ update.zip

打開更新包…

脂肪FS(sda1):體積不正確卸載。某些數據可能已損壞。請運行fsck。

I:讀取鍵E = 65537散列= 20

i:1個密鑰(S)加載

驗證更新包…

i:注釋是1735字節;簽名從結束到1720字節。

I:未能驗證密鑰0

e:未能驗證整個文件簽名

我:verify_file返回0

安裝更新…

E:使用腳本的方法是button_update

預期的參數數(5)

使用按鈕腳本= META-INF / COM /谷歌/安卓/更新腳本產生eMMC

警告:沒有file_contextspackage_extract_file:不能打開/ dev /塊/平臺/ hi_mci.1/by-name/bootargs寫:沒有這樣的文件或目錄

package_extract_file:不能打開/ dev /塊/平臺/ hi_mci.1/by-name/fastboot寫:沒有這樣的文件或目錄

package_extract_file:不能打開/ dev /塊/平臺/ hi_mci.1/by-name/recovery寫:沒有這樣的文件或目錄

package_extract_file:不能打開/ dev /塊/平臺/ hi_mci.1/by-name/logobak寫:沒有這樣的文件或目錄

package_extract_file:不能打開/ dev /塊/平臺/ hi_mci.1/by-name/logo寫:沒有這樣的文件或目錄

package_extract_file:不能打開/ dev /塊/平臺/ hi_mci.1/by-name/kernel寫:沒有這樣的文件或目錄

package_extract_file:包裝不pqparam.img

沒有/ dev /塊/平臺/ hi_mci.1/by-name/qbflag:沒有這樣的文件或directoryerror:make_ext4fs:打開:沒有這樣的文件或目錄

longjmp誤事。

開始......

更新bootargs ......

......更新模式

更新恢復......

更新標志……

更新的標志......

更新引導.....

更新pqparam .....

更新系統......
回復 支持 反對

使用道具 舉報

您需要登錄后才可以回帖 登錄 | 立即注冊

本版積分規則

Archiver|新帖|標簽|軟件|Sitemap|ZNDS智能電視網 ( 蘇ICP備2023012627號 )

網絡信息服務信用承諾書 | 增值電信業務經營許可證:蘇B2-20221768 丨 蘇公網安備 32011402011373號

GMT+8, 2024-12-23 12:18 , Processed in 0.074872 second(s), 12 queries , Redis On.

Powered by Discuz!

監督舉報:report#znds.com (請將#替換為@)

© 2007-2024 ZNDS.Com

快速回復 返回頂部 返回列表