請高手幫忙看看這個S905M的聯通盒子如何刷機

coffeetion · 發表于 2017-7-14 23:43

云南聯通送的，S905M芯片，請問有大大見過這個盒子嗎，可以刷嗎？謝謝！
請高手幫忙看看這個S905M的聯通盒子如何刷機

hao501802766 · 發表于 2017-7-15 10:18

有TTL接口，反面也標識出了對應的線，理論上應該可以直接TTL進行破解的！
請高手幫忙看看這個S905M的聯通盒子如何刷機

coffeetion · 發表于 2017-10-19 22:50

謝謝版主，我進到終端下了，HELP之后，好像命令跟其他的盒子不太一樣？
快要瘋了

gxb_p201_v1#help
?    - alias for 'help'
aml_sysrecovery- Burning with amlogic format package from partition sysrecovery
amlmmc  - AMLMMC sub system
amlnf - aml nand sub-system
amlnf_test- AMLPHYNAND sub-system
autoping- do auto ping test
autoscr - run script from memory
base - print or set address offset
bmp    - manipulate BMP image data
booti - boot arm64 Linux Image image from memory
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cbusreg - cbus register read/write
clkmsr  - measure PLL clock
cmp    - memory compare
cp    - memory copy
crc32 - checksum calculation
cvbs - CVBS sub-system
dcache  - enable or disable data cache
defenv_reserv- reserve some specified envs after defaulting env
dhcp - boot image via network using DHCP/TFTP protocol
echo - echo args to console
efuse - efuse read/write data commands
efuse_user- efuse user space read write ops
emmc - EMMC sub system
env    - environment handling commands
ethchk  - check ethernet status
ethdbg  - set ethernet debug level
ethmode - set ethernet mac mode
ethrst  - reset ethernet phy
exit - exit script
false - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fatsize - determine a file's size
fdt    - flattened device tree utility commands
get_rebootmode- get reboot mode
go    - start application at address 'addr'
gpio - query and control gpio pins
hdmitx  - HDMITX sub-system
help - print command description/usage
i2c    - I2C sub-system
icache  - enable or disable instruction cache
imgread - Read the image from internal flash with actual size
irkey - irkey key_value1 key_value2 key_value3 time_value
itest - return true/false on integer compare
jtagoff - disable jtag
jtagon  - enable jtag
keyman  - Unify key ops interfaces based dts cfg
keyunify- key unify sub-system
loop - infinite loop on address range
macreg  - ethernet mac register read/write/dump
md    - memory display
mdc_clk - do mdc clock
mm    - memory modify (auto-incrementing address)
mmc    - MMC sub system
mmcinfo - display MMC info
mw    - memory write (fill)
mwm    - mw mask function
netspd_f- enforce eth speed
nm    - memory modify (constant address)
open_scp_log- print SCP messgage
osd    - osd sub-system
phyreg  - ethernet phy register read/write/dump
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
read_temp- cpu temp-system
reboot  - set reboot mode and reboot system
reset - Perform RESET of the CPU
run    - run commands in an environment variable
saveenv - save environment variables to persistent storage
sdc_burn- Burning with amlogic format package in sdmmc
sdc_update- Burning a partition with image file in sdmmc card
set_trim_base- cpu temp-system
set_usb_boot- set usb boot mode
setenv  - set environment variables
showvar - print local hushshell variables
sleep - delay execution for some time
store - STORE sub-system
systemoff- system off
temp_triming- cpu temp-system
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true - do nothing, successfully
unpackimg- un pack logo image into pictures
update  - Enter v2 usbburning mode
usb    - USB sub-system
usb_burn- Burning with amlogic format package in usb
usb_update- Burning a partition with image file in usb host
usbboot - boot from USB device
version - print monitor, compiler and linker version
vout - VOUT sub-system
vpu    - vpu sub-system
wipeisb - wipeisb
write_trim- cpu temp-system
write_version- cpu temp-system

568946170 · 發表于 2021-11-9 12:42

我刷過一次機，很好用的，昨天我恢復出廠設置就變黑磚了。現在可能就不活了。

weinm · 發表于 2022-1-26 21:48

我的盒子，也是這樣的命令，怎么辦啊，

woyaozhao · 發表于 2022-3-11 18:06

ok樓主辛苦了,回復學看習下!

woyaozhao · 發表于 2022-3-12 23:54

ok樓主辛苦了,回復學看習下!

› 智能電視盒 / 安卓TV機頂盒區 › 其它品牌盒子

請高手幫忙看看這個S905M的聯通盒子如何刷機 ...

請高手幫忙看看這個S905M的聯通盒子如何刷機

相關帖子